Exclusive Channel Partner in India
Compact fresh air supply unit
TION BREEZER LITE is the development and patented equipment of the Tion company.
Tion Breezer Lite is perhaps the best super compact fresh air purifier with effective dust and allergen filtration, and noise protection. It can be controlled from a smartphone.
Ventilate fresh air in the room without opening the windows
With the windows closed, noise from the street will not disturb you.
G4 filter against fluff, wool, dust and pollen.
Its dimensions are 26 × 26 × 13 cm only! Place it wherever you want.
(1) Tion air intake grid
(2) G4 filter
(3) Heater
(4) Flap
(5) Fan unit
(6) Control buttons
(7) Power cord
(8) Indication
Supplies the air for 3 persons
Purifies the air
Does not cool the air
Heats the air
Works in any weather conditions
Does not supply the air
Does not purify the air
Cools the air
Heats the air
Works in any weather conditions
Supplies the air for one person
Supplies the air for one person
Does not cool the air
Does not heat the air
Cannot work in any weather conditions*
Supplies the air for 1-2 persons
Supplies the air for one person
Does not cool the air
Heats the air
Cannot work in any weather conditions*
The MagicAir base station measures air quality, transmits data to a mobile application and controls the TION BREEZER LITE purifier-disinfectant.
Control Tion Breezer Lite from your smartphone using Bluetooth wireless technology. The application will show the current state of the device and remind you to change the filters. The Tion Remote app is available for download on Google Play and AppStore .Compatible with mobile devices running Android 4.4 and above and iOS 11.0 and above. Requirements for the Bluetooth module version - 4.2 and higher.
The standard installation of the breezer takes only one hour provided that it is carried out by specialists with professional equipment.
The dimensions of the Tion Breezer Lite are 26 × 26 × 13 cm only. It can be easily placed under the window sill, next to the heating radiator, or on the right or left side of the window.
Tion Breezer Lite can be turned in any direction. The air can go up, down or sideways — wherever you like.
An air channel in the wall is made using a diamond drilling rig. It is a quick and clean process. The air channel is insulated and soundproofed from the inside with a special material, and covered with a protective grille from the outside
The breezer is mounted onto the wall. In order to eliminate drafts, the inlet of the device fits tightly in the air duct using a gasket.
The breezer is connected to a regular power outlet.
Coarse dust, particle size > 10 µm
Insects textile fibres, hairs, sandfly ,ash ,spores, pollen,cement, dust,etc
-Pre-filters and circulation filters for civil defense shelters
-Exhaust filters for spray painting booths, kitchens, etc.
-Inlet air filters for air conditioners and compact machines (e.g. window air conditioners, ventilators)
Suspended particulates, particle size < 1 µm
Germs, bacteria, viruses, tobacco smoke, metallic-oxide smoke,etc
E 10
E 11
E 12
-Final filters for rooms with high and highest purity requirements (e.g. for laboratories, for foods processing, pharmaceutical, fine mechanical, optical or electronics plants or medical facilities)
-Final filters for clean rooms, Classes 100,000 or 10,000
Virions (or “particles”) of coronaviruses are spherical particles between 0.06 micron and 0.14 micron in diameter, averaging about 0.125 micron, measured by electron microscope (Zhu et al, 2020). This means that coronavirus particles are smaller than PM2.5, but larger than some dust and gas particles
On 20 March 2020, Setti et all published a study at the Italian Society of Environmental Medicine (SIMA), in which they found a linear relationship with R=0.98 between PM10 levels above 50 microns / m3 and the rate of spread of COVID-19 in Italy. These results are fully consistent with scientific studies on the spread of viruses and bacteria in the population by suspended particles, which correlate the incidence of viral infections with the levels of atmospheric particles (PM10 and PM2.5). (Ciencewicki J. et al., 2007; Sedlmaier N., et al., 2009).The Italian experience indicates a direct relationship between higher levels of particulate matter PM10-2.5 and higher levels of VOC-19.
For every 50 μg/m3 increase in the daily average, the logarithmic infection rate increases by 0.234%. That is to say that at average PM10 levels of 350 μg/m3 , our infection rate will be twice as high as at levels below 50 μg/m3 , as can be seen among the different infection curves observed in the regions analysed in the Italian publication, in which the high infection rate in Lombardy in the other Italian regions stands out.
